Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the engine oil on the Malaguti Phantom F12 125 by loosening the drain plug located at the central lower part of the scooter: once this plug is removed, collect all the used oil in a suitably placed container. Then, also remove the oil filter located in the lower side area of the footwell: after replacing the filter, proceed with topping up. Pour the necessary amount of oil through the breather on the right side of the scooter, near the appropriate cover.

Posted on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the transmission of the Malaguti Phantom F12 125?
Phantom F12 125 The transmission that is installed on the Malaguti Phantom F12 125 can be replaced by loosening the screws that secure the cover located near the rea…
How to Replace the Grips on a Malaguti Phantom F12 125?
How to Replace the Grips on a Malaguti Phantom F12 125?
Phantom F12 125 To replace the grips on a Malaguti Phantom F12 125, lift the grip to insert some penetrating oil inside. This will reduce friction between the inner …
How to Replace the Transmission on the Malaguti Phantom F12 125?
How to Replace the Transmission on the Malaguti Phantom F12 125?
Phantom F12 125 On the Malaguti Phantom F12 125, replacing the transmission involves loosening the screws that secure the cover near the rear wheel on the left side …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos