Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here is a brief procedure for enthusiasts who want to literally 'take apart' their scooter. This can be a great start for those approaching the world of mechanics. To disassemble the fairings, unscrew the relevant 10 mm screws and also remove the seat. Remove the fuel cap and the side fairings will come off. To remove the front plastic, simply unscrew the two hex screws located just below the handlebars (see video). Continue by disassembling the windscreen (again, unscrewing the relevant screws), disconnect the cables going to the handlebars, and remove the handlebars through the central screw.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fairings on a Malaguti Phantom F12 50
How to Remove the Fairings on a Malaguti Phantom F12 50
Phantom F12 50 In this guide, you will find instructions to remove and replace the fairings on a Malaguti Phantom F12 50 scooter. First, place the scooter on its st…
How to Remove the Fairings from a Malaguti Phantom F12 50
Phantom F12 50 Today, in this brief and simple guide, we will see the main steps that will allow you to remove and replace the fairings on the Malaguti Phantom F12 …
How to Remove the Instrument Cluster from a Malaguti Phantom F12
How to Remove the Instrument Cluster from a Malaguti Phantom F12
Phantom F12 50 Before starting, position your Malaguti Phantom F12 on the central stand. Begin by unscrewing and removing the lower screws that secure the instrumen…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos