Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Shock Absorber on Malaguti Phantom F12 100

Model: Malaguti Phantom F12 100
Part: Shocks

Video tutorial

Start by removing the rear mudguard, which has a cross-head screw on the right side of the scooter and two Allen screws on the left side that secure it to the exhaust. Once done, also remove the air filter by unscrewing the two screws with a 5 mm Allen key. Unscrew the two lower bolts and the two upper ones: it doesn't matter which you start with, it will be obvious that to unscrew the first bolt, you will need to hold its opposite with a spanner.

Remove the old shock absorber and clean the two mounting points on the frame and casing thoroughly, then fit the new shock absorber by reversing the process.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Malaguti Phantom F12 100?
Phantom F12 100 To dismantle the engine of the Malaguti Phantom F12 100, completely remove the engine block from its housing by loosening the screws that secure it. …
How to Fit Fairings on Malaguti Phantom F12 100?
How to Fit Fairings on Malaguti Phantom F12 100?
Phantom F12 100 To fit the fairings on the Malaguti Phantom F12, insert the pieces in the order indicated in the video and slot them together in a specific way. Star…
How to Remove the Engine from the Malaguti Phantom F12 100?
How to Remove the Engine from the Malaguti Phantom F12 100?
Phantom F12 100 To remove the engine from the Malaguti Phantom F12 100, loosen the screws that secure the engine block to its housing, located at the central lower p…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos