Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will see how to disassemble and replace the rollers of the variator on a Malaguti Phantom 50 F12 R scooter. First, position your scooter on the centre stand and remove the left side engine cover by unscrewing all the fastening bolts to access the pulley and variator. At this point, unscrew the variator fastening bolt and remove it, then extract the rollers as shown in the video. Replace them with new ones of the correct type, and reassemble everything by applying the reverse procedure of disassembly!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Phantom F12 50 In this guide, you will learn how to remove and replace the transmission belt and variator of the Malaguti F12 Phantom scooter, following the instruc…
Phantom F12 50 Good morning, today's goal is to open the variator cover of our Malaguti Phantom F12. Let's start by placing the scooter on the central stand. Then, …
Phantom F12 50 Before you begin, position your Malaguti Phantom F12 on the centre stand. Start by inserting the key into the ignition switch and turning it fully cl…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos