Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Belt and Variator from a Malaguti F12 Phantom

Model: Malaguti Phantom F12 50
Part:

Video tutorial

In this guide, you will learn how to remove and replace the transmission belt and variator of the Malaguti F12 Phantom scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the fixing screws of the transmission cover; then unscrew the central nut of the fan and clutch, subsequently removing the transmission belt, as shown in the video.

At this point, remove the variator and replace the rollers inside if necessary; apply the reverse procedure for reassembly!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Remove the Variator Cover of a Malaguti Phantom F12?
How to Remove the Variator Cover of a Malaguti Phantom F12?
Phantom F12 50 Good morning, today’s objective is to open the variator cover of our Malaguti Phantom F12. Start by placing the scooter on the centre stand. Next, re…
Replacing Variator Rollers on Malaguti Phantom 50 F12 R
Replacing Variator Rollers on Malaguti Phantom 50 F12 R
Phantom F12 50 In this video tutorial, you will see how to disassemble and replace the rollers of the variator on a Malaguti Phantom 50 F12 R scooter. First, positi…
How to Replace the Clutch on a Malaguti Phantom F12
How to Replace the Clutch on a Malaguti Phantom F12
Phantom F12 50 This guide shows you how to dismantle and replace the clutch pack on the Malaguti Phantom F12 scooter in simple steps. First, place the scooter on it…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos