Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short video tutorial, you will see how to reset the oil change light for routine maintenance on a Malaguti Password 250 scooter, following the steps outlined below. First, turn on the ignition of your scooter by turning the key, and open the plastic cover where the fuses are located; then remove the indicated 30-amp fuse and press the mode button located near the throttle grip, holding it down. Now, reinsert the fuse and you will see that the oil change light will turn off!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Malaguti Password 250
Resetting the Service Light on the Malaguti Password 250
Password 250 Today's guide will show you how to reset the service light for the regular maintenance oil change on the Malaguti Password 250 scooter. First, place …
How to Adjust the Valves on the Malaguti Password 250?
How to Adjust the Valves on the Malaguti Password 250?
Password 250 To adjust the valves on the Malaguti Password 250, you need to open the under-seat compartment and remove the helmet storage compartment below, along…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos