Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Malaguti Password 250

Model: Malaguti Password 250
Part: Service warning light

Video tutorial

Today's guide will show you how to reset the service light for the regular maintenance oil change on the Malaguti Password 250 scooter. First, place the scooter on its centre stand and press the red battery button; then press and hold the mode button for ten seconds while turning the ignition on (turning the key to position one), as illustrated in the video.

After ten seconds, you can release everything and turn off the dashboard; finally, start the engine to complete the reset!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Instructions to Reset Service Light on Malaguti Password 250
Instructions to Reset Service Light on Malaguti Password 250
Password 250 In this short video tutorial, you will see how to reset the oil change light for routine maintenance on a Malaguti Password 250 scooter, following th…
How to Adjust the Valves on the Malaguti Password 250?
How to Adjust the Valves on the Malaguti Password 250?
Password 250 To adjust the valves on the Malaguti Password 250, you need to open the under-seat compartment and remove the helmet storage compartment below, along…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos