Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulb on a Malaguti Phantom F12 R

Model: Malaguti Phantom F12 125
Part: Light bulb

Video tutorial

To replace the front indicator bulb on a Malaguti Phantom F12 R, first remove the screw located at the bottom of the headlamp. Once this screw is loosened, you can pull the headlamp out of its housing by disconnecting the connector at the back.

After the headlamp has been extracted, you can remove the bulb from the back. This allows you to connect and insert the new bulb, securing the headlamp with the screw and checking that everything works.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission on a Malaguti Phantom F12 125?
How to Replace the Transmission on a Malaguti Phantom F12 125?
Phantom F12 125 To replace the transmission on a Malaguti Phantom F12 125, loosen the screws securing the cover at the rear wheel on the left side of the bike. Under…
How to Replace the Grips on a Malaguti Phantom F12 125?
Phantom F12 125 To replace the grips on a Malaguti Phantom F12 125, lift the grip to insert some penetrating oil inside. This will reduce friction between the inner …
How to Replace the Transmission on a Malaguti Phantom F12 125?
How to Replace the Transmission on a Malaguti Phantom F12 125?
Phantom F12 125 To replace the transmission on a Malaguti Phantom F12 125, loosen the screws securing the cover near the rear wheel on the left side of the bike. Und…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos