Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Maruti Eeco
    4. : Air filter

Maruti Eeco - Air filter

Maruti Eeco (2010-2023 / MK 1)
How to remove the air filter in Maruti Eeco?
In this tutorial, we can see how to disassemble the air filter in the Maruti Eeco, in order to clean or replace it directly. Before proceeding, make sure the …read all…
Posted on 14 May 2023 by ScegliAuto
Maruti Eeco (2010-2023 / MK 1)
How to disassemble the air filter in the Maruti EECO van?
In this tutorial we can see how to disassemble the air filter in the Maruti EECO van, so that you can clean or replace it completely. First, let's make sure …read all…
Posted on 3 June 2023 by ScegliAuto
Maruti Eeco (2010-2023 / MK 1)
How to replace the air filter on the Maruti Eeco
To be able to replace the engine air filter on the car, proceed as follows: open the bonnet and locate the box containing the air filter located on the left …read all…
Posted on 21 December 2022 by ScegliAuto
Battery (2) Spark plugs (1) V-belt (1) Rear bench seat (1) Air filter (3) Cabin air filter (1) Petrol filter (2) Handle (1) Engine oil (1) Wheel (2) Suspensions (1) Drums and shoes (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos