Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Maruti Eeco - Wheel

Maruti Eeco (2010-2023 / MK 1)
How to remove the spare tire from Maruti Eeco
In this video tutorial we will see how to disassemble and remove the spare wheel from its compartment on the Maruti Eeco, following the instructions below. …read all…
Posted on 17 December 2022 by ScegliAuto
Maruti Eeco (2010-2023 / MK 1)
How to replace the wheel of the Maruti Eeco
To replace the wheel of the Maruti Eeco we start by taking the spare wheel and the wrench to unscrew the wheel nuts, we take the jack with the crank to raise …read all…
Posted on 19 May 2022 by ScegliAuto
Battery (2) Spark plugs (1) V-belt (1) Rear bench seat (1) Air filter (3) Cabin air filter (1) Petrol filter (2) Handle (1) Engine oil (1) Wheel (2) Suspensions (1) Drums and shoes (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos