Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram and Location for Maruti Alto 800

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Fuse box

Briefly, you will see the instructions that will allow you to discover the fuse diagram and layout for the Maruti Alto 800 in simple and quick steps. First, open the hood of your car and start removing the plastic cover located at the top of the engine compartment, thus accessing the fuse box; you will find the fuse diagram on the inside of the cover, which is also available in the vehicle's owner's manual, as shown in the video. Then, remove and replace any blown fuse with a new one of the same amperage.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Schema and positioning of the external fuses of the Maruti Alto 800
Schema and positioning of the external fuses of the Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Below we will see the information regarding the diagram and the positioning of the external fuse box of the Maruti Alto 800. First, let's open the ca…
Scheme and positioning of internal fuses of the Maruti Alto 800
Scheme and positioning of internal fuses of the Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today we will see the layout and positioning of the internal fuses of the Maruti and Suzuki Alto 800, in simple and quick steps. First of all, we get…
Where to Find the Fuse Box of the Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) If you own a Maruti Alto 800 and don't know where the fuse box is located, don't worry because this guide provides all the necessary instructions to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos