Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the Snorkel kit on Maxus T60 - LDV T60

Model: Maxus T60 MK 1 - Years 2016-2024

Today we will see, in this short and simple guide, how to install the Snorkel kit on the Maxus T60, but also on the lDV T60. First of all we open the bonnet and we go to remove the internal plastic bulkhead that we find on the left; then we disassemble the front wheel arch. At this point we are going to make the cut on the bodywork, thus preparing the base of the Snorkel; then we are going to fix the pipe on the base, in order to prepare the future connection. We then make the necessary changes to the functioning of the Snorkel, following the video tutorial to the end!

Posted on 3 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How to install the front towing hitch on the Maxus T60.
How to install the front towing hitch on the Maxus T60.
Maxus T60 (2016-2024 / MK 1) .. towing hitch of the Maxus T60, as well as the LDV T60. First, let's move to the front and start by removing the plastic cover that we find under the.. …
How to remove and replace the rear door panel of the Maxus T60
How to remove and replace the rear door panel of the Maxus T60
Maxus T60 (2016-2024 / MK 1) .. rear door panel of the Maxus T60, but also of the LDV T60. First we open the rear door and start unscrewing the fixing screws that we find on the sides.. …
How to install the Maxus T60 bed cover.
How to install the Maxus T60 bed cover.
Maxus T60 (2016-2024 / MK 1) Below we will see the instructions that will allow us to install the plastic side covers to protect the rear bed of the Maxus T60, in simple and quic…

Other guides you may be interested in

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos