Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove and Replace the Rear Door Panel on the Maxus T60

Model: Maxus T60 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

Video tutorial

In this guide, we will discover the instructions on how to remove and replace the rear door panel on the Maxus T60, as well as the LDV T60. First, open the rear door and start unscrewing the mounting screws found on the sides of the panel; then remove the plastic cover of the grab handle, unscrewing the additional screws located underneath, as shown in the video.

At this point, pry on the sides of the panel to detach and remove it, disconnecting the electrical connector of the window switch and the handle cable; apply the reverse procedure for reassembly!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Maxus T60 (2016-2024 / MK 1) Today, you will learn how to remove the front door panel of the Maxus T60 by following these simple and quick steps. First, open the front door and s…
Maxus T60 (2016-2024 / MK 1) To replace the radio in the Maxus T60, detach the plastic covers around the radio on the center panel. Once all panels are removed, pull out the clim…
Maxus T60 (2016-2024 / MK 1) In this guide, we will look at the procedure to remove and replace the timing belt on the Maxus T60 and MG T60. First, open the hood of your car and …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos