Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel of the Maxus T60

Model: Maxus T60 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

Video tutorial

Today, you will learn how to remove the front door panel of the Maxus T60 by following these simple and quick steps. First, open the front door and start by removing the triangular plastic cover; then remove the plastics from the door panel and unscrew all the mounting screws found in it, inside the holes, as shown in the video.

At this point, pry the sides of the panel to detach and remove it, disconnecting the electrical connector of the switch panel and the metal cable of the opening handle!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Maxus T60 (2016-2024 / MK 1) In this guide, we will discover the instructions on how to remove and replace the rear door panel on the Maxus T60, as well as the LDV T60. First, op…
Maxus T60 (2016-2024 / MK 1) In this guide, we will look at the procedure to remove and replace the timing belt on the Maxus T60 and MG T60. First, open the hood of your car and …
Maxus T60 (2016-2024 / MK 1) To replace the radio in the Maxus T60, detach the plastic covers around the radio on the center panel. Once all panels are removed, pull out the clim…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos