Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. G50
    4. : How to duplicate the Maxus electronic key

Maxus G50 - Video tutorial

Model: Maxus G50 MK 1 - Years 2019-2024
Part: Key
Operation: How to duplicate the Maxus electronic key

It is possible to duplicate the remote control key of the car using a specific program and connecting a PC to the car, in detail: open the application on the PC and select "system available" and then select the first line that will appear, after which click on "diagnosis" and establish the connection with the vehicle, then turn on the control panel and click on "start communication". Then click on "special functions" and select "configure plips", then click on "start processing" and connect to the internet. Then take the new remote control key and press the two buttons simultaneously until the red light starts flashing, at which point release the two buttons, wait 10 seconds and press just one of the two buttons to complete activation.


Posted on 23 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos