Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Maxus T60.

Model: Maxus T60 MK 1 - Years 2016-2024
Part: Engine oil

This short guide will illustrate the main steps to perform ordinary maintenance on the Maxus T60, replacing the engine oil and oil filter. First, we lift the vehicle and start unscrewing the oil drain plug found on the oil pan, letting the old oil drain into a container for about ten minutes. Then, we open the engine hood and remove the turbocharger hose, accessing the oil filter. We unscrew and replace the oil filter cartridge, screwing it in by hand and tightening it gently. Finally, we top up the oil!

Posted on 26 May 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to replacing the timing belt of the MG T60 - Maxus T60.
Guide to replacing the timing belt of the MG T60 - Maxus T60.
Maxus T60 (2016-2024 / MK 1) In this guide, we will see the procedure that will allow us to disassemble and replace the timing belt of the Maxus T60 and MG T60. First, we open th…
How to install the Snorkel kit on Maxus T60 - LDV T60
How to install the Snorkel kit on Maxus T60 - LDV T60
Maxus T60 (2016-2024 / MK 1) Today we will see, in this short and simple guide, how to install the Snorkel kit on the Maxus T60, but also on the lDV T60. First of all we open the…
To reset the service of the Matus T60.
To reset the service of the Matus T60.
Maxus T60 (2016-2024 / MK 1) To reset the service of the Maxus T60, we start by turning on the car's instrument panel, starting the car's engine, and operating from the central i…

Other guides you may be interested in

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos