Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the MG T60 - Maxus T60.

Model: Maxus T60 MK 1 - Years 2016-2024
Part: Timing belt

In this guide, we will see the procedure that will allow us to disassemble and replace the timing belt of the Maxus T60 and MG T60. First, we open the engine hood of our car and start removing the serpentine belt by loosening the tensioner. Then, we unscrew the bolts of the crankshaft pulley, and remove the distribution cover, as shown in the video. At this point, we take the necessary references to carry out the disassembly and replacement of the timing belt, following the video tutorial until the end!

Posted on 23 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the alternator belt of the Maxus T60
How to replace the alternator belt of the Maxus T60
Maxus T60 (2016-2024 / MK 1) Let's see in this guide how to disassemble and replace the alternator belt of the Maxus T60, following the instructions below. First of all, we open …
How to install the Snorkel kit on Maxus T60 - LDV T60
How to install the Snorkel kit on Maxus T60 - LDV T60
Maxus T60 (2016-2024 / MK 1) Today we will see, in this short and simple guide, how to install the Snorkel kit on the Maxus T60, but also on the lDV T60. First of all we open the…
Removal of the alternator belt on a Maxus T60
Removal of the alternator belt on a Maxus T60
Maxus T60 (2016-2024 / MK 1) In this video we see how to change the alternator belt and the alternator itself on a Maxus T60: first, we need to remove the belt from the tensioner…

Other guides you may be interested in

How to Replace the Timing Belt on the BMW X3

Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove the screws to take off the upper panels. Now you need to remove the air filter cover from the engine. In any case, you will need to remove all obstructing parts until you reach the belt. In the diagram, you can see which pulley acts as the tensioner, so loosen it to remove the belt. Once the tension is off the belt, you can take it out and replace it without issues. Retrace the steps in reverse for reassembly of the various components.

Watch the video!


by ScegliAuto

More videos