Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mazda CX-3 remote control?

Model: Mazda Cx 3 MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

Video tutorial

In this tutorial we can see how to replace the battery of the Mazda CX-3 remote control, an extremely simple and quick operation. To do this we will need a small screwdriver with a flat tip and a replacement battery of type CR2032. First of all, insert the tip of the screwdriver along the perimeter of the rear door, then lever and unlock it. Then remove the internal cap in the same way, extract the old battery and insert the replacement one, being careful to respect the polarity.

At this point all that remains is to reassemble everything following the reverse procedure.


Posted on 3 December 2024 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Mazda CX-3
Replacing the Key Fob Battery for the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) In today's tutorial, we will see how to disassemble and replace the battery of the key fob for the Mazda CX-3. First, take the key fob in hand and st…
How to Replace the Battery in the Mazda CX-3 Remote
How to Replace the Battery in the Mazda CX-3 Remote
Mazda Cx 3 (2015-2023 / MK 1) This guide shows how to replace the battery of the car's electronic key. The first step is to remove the emergency key from the remote and, using a f…
How to replace the battery of the Mazda CX 3
How to replace the battery of the Mazda CX 3
Mazda Cx 3 (2015-2023 / MK 1) If you want to replace the battery of your Mazda CX 3 by yourself, you must pay attention to the steps described in the following guide and then put …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos