Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front door panel of the Mazda CX8

Model: Mazda Cx 8 KG - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

Video tutorial

In this video, we will see how to disassemble the inner panel of the front door of the Mazda CX8: we start by removing the inner lining of the handle and the door handle, where we will find some fixing screws to remove. Now, using a plastic spatula, we start from the innermost part of the door and snap all the clips that secure the panel to the metal door.

We detach the top part last, always using a certain delicacy to avoid breaking the clips. Now we will have to disconnect the electric connector of the window lifter, after which we can remove the panel.


Posted on 15 December 2024 by ScegliAuto


Related tutorials

How to Install Flaps on a Mazda CX-8
How to Install Flaps on a Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) To install the flaps on the Mazda CX-8, first detach the three lower clips located in the rear wheel well using a flat screwdriver. Next, position th…
How to Remove the Door Panel of the Mazda CX-8?
How to Remove the Door Panel of the Mazda CX-8?
Mazda Cx 8 (2017-2024 / KG) To remove the door panel of the Mazda CX-8, unscrew the screws that secure the panel: these will be located next to the window switch and in the hand…
Mazda CX-8 Fuse Box Diagram
Mazda CX-8 Fuse Box Diagram
Mazda Cx 8 (2017-2024 / KG) This model from the Japanese manufacturer has two fuse boxes. The first is located in the cabin at the lower part of the dashboard next to the driver…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos