Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 8
    4. : How to install flaps in Mazda CX8

Mazda Cx 8 - Video tutorial

Model: Mazda Cx 8 KG - Years 2017-2024
Part: Bodywork
Operation: How to install flaps in Mazda CX8

To install the flaps in the Mazda CX8 you must first detach, with a flat screwdriver, the three lower clips located in the rear wheel guard. Then place the flap in correspondence with the holes of the clips and being careful not to deform them, insert the clips again. For the front flaps, carry out the same operation remembering to always release the clips without breaking them inside. For correct hooking, push it inside until you hear the classic click that confirms its hooking. For convenience, turn the wheels in the opposite direction to the side you are working on to make working comfortable.


Posted on 19 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos