Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install TPU on Mazda CX-8 Gear Shift Panel

Model: Mazda Cx 8 KG - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Video tutorial

First, remove the film on the gear shift panel if it is still present. Next, use a piece of tape to dab the entire panel to clean it of any hair and dust.

For safety, spray some degreaser and wipe it down with a cloth or tissue. Once the panel is clean, spray the TPU film product over the entire panel and the film.

Now, apply the TPU film slowly and evenly to avoid any bubbles forming under the film.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Removing the Radio from the Mazda CX-8
Removing the Radio from the Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) In this video tutorial, you will learn how to remove the factory radio from the Mazda CX-8 in simple and quick steps. First, get inside the vehicle a…
How to Replace the Cabin Filter in the Mazda CX-8?
How to Replace the Cabin Filter in the Mazda CX-8?
Mazda Cx 8 (2017-2024 / KG) Replacing the cabin filter in the Mazda CX-8 is an extremely simple and quick operation. Let's see how to proceed in this tutorial. First, sit in the…
How to Replace the Center Display of the Mazda CX-8
How to Replace the Center Display of the Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) In this video tutorial, you will learn how to disassemble and replace the center display of the Mazda CX-8's radio, following the instructions below.…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos