Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Mazda CX-8?

Model: Mazda Cx 8 KG - Years 2017-2024
Part: Cabin air filter

Replacing the cabin filter in the Mazda CX-8 is an extremely simple and quick operation. Let's see how to proceed in this tutorial. First, sit in the passenger seat, then open the glove compartment, disconnect the damper on the right, and unclip the drawer from the dashboard. Next, locate the long rectangular cover, unlock the clip in the center, and remove the old filter. Finally, clean the inside of the housing from any debris, insert the replacement in the correct orientation, and reassemble everything by following the reverse procedure.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Center Display of the Mazda CX-8
How to Replace the Center Display of the Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) In this video tutorial, you will learn how to disassemble and replace the center display of the Mazda CX-8's radio, following the instructions below.…
How to Remove the Door Panel of the Mazda CX-8?
How to Remove the Door Panel of the Mazda CX-8?
Mazda Cx 8 (2017-2024 / KG) To remove the door panel of the Mazda CX-8, unscrew the screws that secure the panel: these will be located next to the window switch and in the hand…
Mazda CX-8 Fuse Box Diagram
Mazda CX-8 Fuse Box Diagram
Mazda Cx 8 (2017-2024 / KG) This model from the Japanese manufacturer has two fuse boxes. The first is located in the cabin at the lower part of the dashboard next to the driver…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos