Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Center Display of the Mazda CX-8

Model: Mazda Cx 8 KG - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

Video tutorial

In this video tutorial, you will learn how to disassemble and replace the center display of the Mazda CX-8's radio, following the instructions below. First, get inside the vehicle and start by removing the center cover of the dashboard instrument panel, along with the air vents; then disconnect the electrical connector located at the back.

At this point, remove the screws securing the display, disconnecting the electrical wiring on the back; replace the display with the new one and reassemble everything by applying the reverse procedure!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Removing the Radio from the Mazda CX-8
Removing the Radio from the Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) In this video tutorial, you will learn how to remove the factory radio from the Mazda CX-8 in simple and quick steps. First, get inside the vehicle a…
Resetting the Service Light on Mazda CX Vehicles
Resetting the Service Light on Mazda CX Vehicles
Mazda Cx 8 (2017-2024 / KG) On Mazda CX vehicles, you can reset the service light yourself directly from the onboard computer, without going to a repair shop. Get in the vehicle…
How to Replace the Cabin Filter in the Mazda CX-8?
How to Replace the Cabin Filter in the Mazda CX-8?
Mazda Cx 8 (2017-2024 / KG) Replacing the cabin filter in the Mazda CX-8 is an extremely simple and quick operation. Let's see how to proceed in this tutorial. First, sit in the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos