Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from the Mazda CX-8

Model: Mazda Cx 8 KG - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

Video tutorial

In this video tutorial, you will learn how to remove the factory radio from the Mazda CX-8 in simple and quick steps. First, get inside the vehicle and start by removing the entire center cover of the dashboard, prying at the sides with something thin; then unscrew the mounting screws of the radio or display using a Phillips screwdriver, as illustrated in the video.

At this point, disconnect all the electrical wiring located at the back to completely remove the factory radio; apply the reverse procedure for reassembly!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Center Display of the Mazda CX-8
How to Replace the Center Display of the Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) In this video tutorial, you will learn how to disassemble and replace the center display of the Mazda CX-8's radio, following the instructions below.…
How to Remove the Door Panel of the Mazda CX-8?
How to Remove the Door Panel of the Mazda CX-8?
Mazda Cx 8 (2017-2024 / KG) To remove the door panel of the Mazda CX-8, unscrew the screws that secure the panel: these will be located next to the window switch and in the hand…
How to Replace the Cabin Filter in the Mazda CX-8?
How to Replace the Cabin Filter in the Mazda CX-8?
Mazda Cx 8 (2017-2024 / KG) Replacing the cabin filter in the Mazda CX-8 is an extremely simple and quick operation. Let's see how to proceed in this tutorial. First, sit in the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos