Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reprogram the remote control of the Mazda CX-30?

Model: Mazda Cx 30 MK 1, - Years 2019-2026
Part: Key

In this tutorial, we can see how to reprogram the remote control of the Mazda CX-30, an extremely simple and quick operation to be carried out, for example, after replacing the battery. First of all, let's go inside the car, then turn on the instrument panel and press the lock button on the remote control four times in a row. Then wait for the red light on the remote control to turn on, press and hold the same button for a few seconds. At this point, all that remains is to verify that the procedure was successful.

Posted on 18 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Mazda CX-30 remote control?
How do you replace the battery of the Mazda CX-30 remote control?
Mazda Cx 30 (2019-2026 / MK 1, ) In order to replace the battery of the Mazda CX-30 remote control, you need to use an object to pry off the back panel of the device: once this panel…
How to replace the battery of the Mazda CX-30 remote control?
How to replace the battery of the Mazda CX-30 remote control?
Mazda Cx 30 (2019-2026 / MK 1, ) In this tutorial we can see how to replace the battery of the Mazda CX-30 remote control, an extremely simple and quick operation. To do this, we wil…
How to disassemble the remote control and access the battery of the Mazda CX-30
How to disassemble the remote control and access the battery of the Mazda CX-30
Mazda Cx 30 (2019-2026 / MK 1, ) Disassembling and replacing the battery of the key remote for the Mazda CX-30 is really very simple and does not require the use of special tools. Fi…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos