Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on the Mazda 6

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Service warning light

Shortly we will see the instructions that will allow us to reset the tire pressure warning light on the Mazda 6. First, we get into the car and start the instrument panel; then we use the central tunnel command to enter the car settings, then go to the service and engine oil section to confirm and perform the reset, as shown in the video. At this point, we exit the settings to save all the changes made, verifying the actual reset of the warning on the instrument panel display!

Posted on 13 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Mazda 6
How to reset the tire pressure light on the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) The activation of the tire pressure warning light indicates a loss of pressure or a possible puncture on one or more tires; let's try to reset the wa…
How to Reset the Tyre Pressure Warning Light on a Mazda 6
How to Reset the Tyre Pressure Warning Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) This guide briefly outlines the necessary instructions to reset the tyre pressure warning light on a Mazda 6; before performing the reset, ensure all…
How do you reset the tire pressure light on the Mazda 6?
How do you reset the tire pressure light on the Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) To reset the tire pressure warning light on the Mazda 6, you need to inflate the tires until they reach the correct pressure value: this value is ind…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos