Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Mazda CX-5?

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Blower motor

In this tutorial, we will see how to replace the cabin fan in a Mazda CX-5, a very simple and quick operation. First, ensure that the instrument panel is off for safety, then go to the passenger side and remove the lower cover of the glove compartment by unlocking the relevant clips. Next, disconnect the power connector of the fan, unscrew the three fixing screws with a cross screwdriver, and extract the fan from its housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Posted on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan in a Mazda CX-5.
How to Replace the Cabin Fan in a Mazda CX-5.
Mazda CX-5 (2012-2017 / MK 1, KE) .. This video will show you how to replace the cabin fan in a Mazda CX-5. You will need to work on the passenger side: under the.. …
How to Replace the Rear Lights on a Mazda CX-5?
How to Replace the Rear Lights on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) This tutorial explains how to replace the rear lights on a Mazda CX-5, useful if one of them is damaged or if you want to upgrade. First, remove the …
How to Replace the Front Headlamp Bulb on the Mazda CX-5
How to Replace the Front Headlamp Bulb on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) To replace the front headlamp bulb on your Mazda CX-5 Series 2 independently, follow the steps outlined in this guide. First, ensure the car is compl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos