Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb on a Mazda 2

Model: Mazda 2 DJ, MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

In today's article, we will see how to replace the front headlamp bulb on a Mazda 2. First, lift the bonnet and secure it with the appropriate support rod, then access the rear of the headlamp and remove the bulb connector. After disconnecting the connector, remove the rubber cover of the bulb by pulling it outward; at this point, lift the bulb retaining clip, then extract the old bulb, insert the new one, secure it with the metal clip, then reinsert the rubber cover and reconnect the connector.

At this point, the procedure is complete, and the bulb has been replaced.


Posted on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Mazda 2
How to Replace the Front Headlamp Bulb on a Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) In this new mini guide for your Mazda 2 (2007-2014), discover how to correctly replace the front headlamp bulb. First, park your car safely and turn …
Number Plate Light Replacement on a Mazda 2
Number Plate Light Replacement on a Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) Let's see how to replace the number plate bulb on a Mazda 2. Use plastic levers to remove the number plate light. Remove the light unit located in th…
How to Replace the Dipped Beam Bulb on a Mazda 2
How to Replace the Dipped Beam Bulb on a Mazda 2
Mazda 2 (2014-2023 / DJ, MK 3) To replace the front dipped beam bulbs on a Mazda 2, start by opening the bonnet, then disconnect the connector for the left bulb; once the connector…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos