Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 2
    4. : How to replace the low beam bulb of the Mazda 2.

Mazda 2 - Video tutorial

Model: Mazda 2 DJ, MK 3 - Years 2014-2023
Part: Headlight bulb
Operation: How to replace the low beam bulb of the Mazda 2.

To replace the front bulbs of the low beams on the Mazda 2, we begin by opening the hood, disconnecting the connector of the left bulb. Once the connector is disconnected, we remove the rubber cap at the back of the headlight. Now, we release the clip that holds the bulb in place from behind and remove the bulb. After removing the old bulb, we insert the new bulb in the same direction as the old one, put back the rubber cap at the back of the headlight, and reconnect the connector. Once the bulb is replaced, we can check the proper functioning of the new bulb. Now, we proceed to replace the bulb of the other headlight using the same procedure and also verify the proper functioning of the other bulb.


Posted on 1 November 2023 by ScegliAuto

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos