Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seatbelt in a Mazda 323

Model: Mazda Mazda Various

Video tutorial

In this video, you will learn how to replace the seatbelt in a Mazda 323. First, open the front and rear doors, and using a lever, unclip and remove the finishing plastic of the scuff plate. Next, unclip the lower cover of the central pillar to expose the pretensioner, and remove the cover of the bolt that secures the seatbelt's sliding ring, then unscrew the bolt with a 17mm socket.

Next, unscrew the seatbelt fixing bolt using the same 17mm socket, remembering to retrieve the washers from the fixing bracket. Also, unscrew the upper and lower bolts of the pretensioner using a 10mm and a 17mm socket, respectively.

Remove the pretensioner, disconnect the electrical connector, and retrieve the fixing bracket. Install the new pretensioner and reconnect the connector, secure the sliding ring, and tighten the new seatbelt.

Finally, reassemble everything.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter in a Mazda 323.
How to replace the engine air filter in a Mazda 323.
Mazda Mazda Various In this video tutorial, you can see how to replace the engine air filter in a Mazda 323 F VI produced from 1998 to 2003, following a few simple steps…
Placement of the tire pressure label on Mazda vehicles
Placement of the tire pressure label on Mazda vehicles
Mazda Mazda Various Traveling with tires inflated to the correct pressure is very important to reduce fuel consumption, for the comfort and safety of driving Mazda vehic…
Where to Find the Fuse Box on a Mazda Astina
Where to Find the Fuse Box on a Mazda Astina
Mazda Mazda Various If you own a Mazda Astina (1995-1998) and want to find the fuse box, follow the steps in this guide. First, ensure the car is completely off for safe…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos