Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seat of a Mazda and remove the covering to wash it

Model: Mazda Mazda Various
Part: Seat

In this video we can see how to disassemble the front seat of a Mazda, in order to remove and then wash its cover. First, the seat was removed from the car: it was easy because it was attached to the frame by only four bolts. Now we need to remove the cover in order to wash it: on the back we release the cover from the metal tabs, then we remove the bolts under the seat, so we can detach the seat from the backrest. This way we can remove the seat cover, which is attached to metal tabs. When removing it from the seat, be careful not to tear it. As for the padding, we can wash it in the bathtub, or with water and sponge. Repeat the operation also for the backrest.

Posted on 20 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Suspension on a Mazda Bongo
How to Replace the Front Suspension on a Mazda Bongo
Mazda Mazda Various This brief guide provides the main instructions on how to remove and replace the front suspension on a Mazda Bongo. First, lift the vehicle and begin…
How to replace the headlights of the Mazda B-Series Truck
How to replace the headlights of the Mazda B-Series Truck
Mazda Mazda Various In this guide, we will see the main instructions on how to remove and replace the headlights of the Mazda B-Series Truck. First, move to the front of…
How to reset the oil light on the Mazda CX50
How to reset the oil light on the Mazda CX50
Mazda Mazda Various If you want to manually reset the engine oil light of your Mazda CX50 quickly and safely, just follow all the steps described in the following guide …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos