Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of a Mazda 3

Model: Mazda 3 MK 3, BM, BN - Years 2013-2019
Part: Door trim panel

Before we can begin, we will have to go to open the door of our Mazda 3. Using a thin but strong tool, we begin by going to disengage and remove the inserts of the door panel. Next, we will have to unscrew and remove the fixing screws of the door panel. Once we have removed the fixing screws, we will have freed the door panel. At this point, we will need to disengage and remove the door panel from its housing. When we have completed this step, we will have to unhook the electric plug and the cable of the handle, and we will have completed the disassembly.

Posted on 25 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Door Handle of the Front Door on a Mazda 3
How to Remove the External Door Handle of the Front Door on a Mazda 3
Mazda 3 (2013-2019 / MK 3, BM, BN) The instructions in this guide will allow you to remove and replace the external door handle of the front door on a Mazda 3. First, open the front do…
Loudspeaker disassembly of a Mazda 3
Loudspeaker disassembly of a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Let's see the disassembly of the door panel of a Mazda 3 with the attached disassembly of the damaged speaker. To access the speaker we have to remov…
Remove the Door Panel (Driver's Side) on a Mazda 3
Remove the Door Panel (Driver's Side) on a Mazda 3
Mazda 3 (2003-2009 / MK 1, BK) Remove the door panel (driver's side) on a Mazda 3: disconnect the battery terminals located in the engine compartment (if you need to disconnect the…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos