Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Anti-roll bar replacement

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Anti roll bar
Operation: Anti-roll bar replacement

Unscrew the four fixing pins of the plate in the center of the rear axle; then unscrew the nuts fixing the bar to the heads and then those of the supports containing the rubber pads. Then remove the bar and extract the supports from the rubber pads; then apply the same supports to the rubber pads of the new bar and proceed backwards for reassembly: a larger section bar will give a decidedly better torsional stiffness to the benefit of stability and road holding. Take care to carefully tighten the various pins, perhaps also applying thread locker.


Posted on 17 July 2023 by ScegliAuto



How to replace the battery of a Mazda 3 car
Mazda 3 (2009-2013 / MK 2, BL) In this video tutorial, we can see how to proceed with the replacement of the battery in a Mazda 3 car. First of all, it will be necessary to have ac
Removing the internal air vent on Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) .. vents in the dashboard (we always use the anti-scratch lever). We carry out the assembly of the metal / plastic stop. We test the correct functioning..
Front headlight disassembly instructions
Mazda 3 (2009-2013 / MK 2, BL) In order to disassemble the front light, it is first necessary to remove the front bumper: therefore, start by opening the front hood and removing th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos