Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel on the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Wheel

See other generations:
Video tutorial

To replace the tyre on the Mazda CX-5, do the following: start by opening the boot, lift the carpet covering the wheel, and using a suitable key, unscrew the wheel cover and remove it, also taking out the spare wheel. Go to the side of the vehicle, position the jack where indicated, and loosen the bolts.

Now you can lift the car, finish unscrewing the bolts, and remove the wheel. Take the spare wheel, place it in place of the flat tyre, screw in the bolts, lower the car, tighten the bolts, place the flat tyre in the boot, replace the wheel cover, lower the carpet, and the operation is complete.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel on the Mazda CX-5 MK2
How to Replace the Wheel on the Mazda CX-5 MK2
Mazda CX-5 (2017-2024 / MK 2) Discover in this brief and simple guide how to remove and replace the rear wheel, as well as the front wheel, with the spare on the second generation…
Replacement of the wheel with the spare one of the Mazda CX-5.
Replacement of the wheel with the spare one of the Mazda CX-5.
Mazda CX-5 (2017-2024 / MK 2) Today we will see the instructions that will allow us to replace the wheel with the spare one of the Mazda CX-5. First of all, we open the rear hatch…
How to Change the Wheel on the Mazda CX-5 MK2
How to Change the Wheel on the Mazda CX-5 MK2
Mazda CX-5 (2017-2024 / MK 2) In today’s video, we will see step-by-step instructions for removing and replacing the wheel with the spare on the second generation Mazda CX-5, in s…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos