Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Number Plate Lights of the Mazda 2

Model: Mazda 2 DJ, MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: License plate light

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the number plate lights of the third series Mazda 2 by following these simple and quick steps. First, open the tailgate of the boot and start by removing the fabric inner lining; then extract the electrical connectors along with the bulbs, removing them and replacing them with new ones, as shown in the video.

At this point, correctly insert the bulbs into the lamp holder and reassemble everything onto the light ceiling; finally, reattach the fabric inner lining of the tailgate!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Replacing the number plate bulb in the Mazda 2
Replacing the number plate bulb in the Mazda 2
Mazda 2 (2014-2023 / DJ, MK 3) Today's procedure will show you how to remove and replace the number plate bulb in the Mazda 2, following the instructions below. First, move to the …
Number Plate Light Replacement on a Mazda 2
Number Plate Light Replacement on a Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) Let's see how to replace the number plate bulb on a Mazda 2. Use plastic levers to remove the number plate light. Remove the light unit located in th…
How to Replace the Front Headlight Bulb on a Mazda 2
How to Replace the Front Headlight Bulb on a Mazda 2
Mazda 2 (2002-2007 / MK 1, DY) Today, learn how to replace the left front headlight bulb on a Mazda 2, model produced from 2002 to 2007. To perform this operation, open the front b…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos