Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on the Mazda CX-9?

Model: Mazda Cx 9 TB - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Spark plugs

See other generations:
Video tutorial

To replace the spark plugs on the Mazda CX-9, open the hood to remove the plastic cover from the top of the engine block. Under this cover, you will find the coils connected to the injectors, which need to be disconnected.

Then, the injectors can be pulled out of their housings, giving access to the underlying spark plugs. Using a socket wrench, remove the old spark plugs and replace them with new ones; finally, reinstall all the components that were removed earlier.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Mazda Cx 9 (2016-2024 / TC) To replace the battery in a Mazda CX-9, open the hood to access the components inside the engine compartment. The battery is located on the right sid…
Mazda Cx 9 (2007-2015 / TB) To replace the car stereo on a Mazda CX-9, pry at the sides of the center dashboard panel where the vertical trim pieces are located. These need to b…
Mazda Cx 9 (2016-2024 / TC) In today's video, we will see how to replace the air filter in the Mazda CX-9. First, let the vehicle cool down if it has been used to avoid unpleasa…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos