Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs in a Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Headlight bulb

Replacing the front headlight bulbs in a Mazda CX-5 is a very simple and quick task. Let's see how to proceed in this video. Starting with the position lights, type 9005, open the bonnet and locate the bulb holder at the back of the headlight, disconnect the connector and extract it by turning it counter-clockwise. For the dipped beam, the procedure is exactly the same, in this case, the bulb is type H11. Repeat the operation for the opposite headlight if necessary, test the bulbs, and follow the reverse procedure to reassemble everything.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial, you will learn how to replace the rear headlamp bulbs on a Mazda CX-5, a very simple and quick operation. Before proceeding, ensure…
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
How to Replace the Rear Headlamp Bulbs on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) As shown in this tutorial, replacing the rear headlamp bulbs on a Mazda CX-5 is an extremely simple and quick task. Before proceeding, ensure the key…
Replacing the Rear Light of the Mazda CX-5
Replacing the Rear Light of the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Briefly follow the instructions to remove and replace the rear light and all its bulbs on the Mazda CX-5. First, open the boot and start by removing …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos