Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : How to change the engine oil and oil filter and reset the Mazda CX5 Mk2 service indicator

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 2 - Years 2017-2023
Part: Engine oil
Operation: How to change the engine oil and oil filter and reset the Mazda CX5 Mk2 service indicator

The guide shows how to change the engine oil and related filter of the Mazda CX5 Mk2. After opening the bonnet and unscrewing the oil tank filler cap, lift the vehicle and secure it. From the bottom of the vehicle, unscrew the fixing bolts and the plastic pin of the filter protection panel and unscrew the oil pan bleed bolt; during this procedure, place a container for the used oil. Refit the drain plug and unscrew the engine oil filter. Replace it with a new filter whose gasket has been lubricated with oil. Tighten it to the correct torque specified in the use and maintenance manual. Close the protective panel and lower the vehicle. Fill the tank with the correct quantity and type of oil specified in the user manual and turn the engine on for a few minutes. Check the correct fluid level and top up if necessary. Reset the maintenance warning light from the vehicle service menu, in the â € œApplicationsâ € and â € œMaintenanceâ € tab.


Posted on 7 July 2022 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos