Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : How to replace Mazda CX-5 engine oil and oil filter

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Engine oil
Operation: How to replace Mazda CX-5 engine oil and oil filter

Let's find out how to carry out the maintenance service of the oil change of the Mazda CX-5 first series, with 2.2 diesel engine. First we lift the car and start unscrewing the oil vent bolt that we find on the sump; first, however, we remove the plastic panel. After having drained the oil in a container, we go to unscrew and remove the oil filter, using the special wrench; then we replace the filter with the new one, gently tightening. At this point we open the bonnet and open the filler cap, pouring the new oil!


Posted on 21 July 2022 by ScegliAuto

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos