Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : Mazda CX-5 engine oil replacement

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 2 - Years 2017-2023
Part: Engine oil
Operation: Mazda CX-5 engine oil replacement

The replacement of the engine oil and its filter is a maintenance that can be easily done by yourself as long as you have the foresight to dispose of the exhausted ones correctly; start the engine for a few minutes to warm it up and then make it easier to drain the oil; place the vehicle on a level surface, perhaps on trestles, to access the lower part of the engine, remove the stone blocking plastic and intercept the filter seat and the drain plug; unscrew the cap to drain the oil and replace the filter with a new one, sprinkling the gasket with clean oil before screwing it in; replace the sump plug washer before screwing it back on and finally fill the engine with new oil until the maximum level is reached.


Posted on 14 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos