Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Mazda 2

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Warning light – error code

In this brief guide, follow the procedure to reset the maintenance light on a Mazda 2, third generation model produced from 2014 to 2022. Start by turning on the ignition to power the instrument cluster. Use the dial on the centre console to navigate the menu options on the central display, then select "Applications", "Maintenance", and "Scheduled". Set the new interval parameters and then select the "Reset" option. Finally, perform the same operation on the "Oil Change" option to complete the maintenance reset.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Mazda 2
How to reset the service indicator on the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) If you need to manually reset the service indicator light on your Mazda 2, all you have to do is pay attention to the following steps and then put th…
How do you reset the Service light on the Mazda 2?
How do you reset the Service light on the Mazda 2?
Mazda 2 (2014-2023 / MK 3, DJ) To reset the Service light of the Mazda 2, you need to turn on the instrument panel so that you can navigate through the menu that will be displayed …
How to Reset the Service Light on the Mazda 2?
How to Reset the Service Light on the Mazda 2?
Mazda 2 (2014-2023 / MK 3, DJ) To reset the Service light on the Mazda 2, turn on the instrument panel to access the menu on the central display of the dashboard. Select the icon o…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos