Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part:

In this very short tutorial video today, we will see the necessary steps to reset the tyre pressure warning light on a Mazda 3, third generation model produced from 2013 to 2019. Before performing this operation, it is important to check the correct pressure of all four tyres as indicated by the manufacturer, but now let's look at the procedure. First, turn on the instrument cluster of the vehicle without starting the engine, then press the reset button located on the controls to the left of the steering wheel, and hold it down until you hear a beep to complete the reset.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure on a Mazda 3
How to Reset the Tyre Pressure on a Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) To reset the tyre pressure on a Mazda 3, start by adjusting the tyre pressures to the values indicated by the manufacturer (see the label on the door…
How to reset the TPMS light on the MAZDA 3
How to reset the TPMS light on the MAZDA 3
Mazda 3 (2013-2019 / MK 3, BN, BM) When the TPMS light comes on in the MAZDA 3, it is necessary to proceed with checking the pressure of all four tires. After adjusting the pressure if…
How do you reset the tire pressure light on the Mazda 3?
How do you reset the tire pressure light on the Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) To reset the tire pressure warning light on the Mazda 3, you need to inflate the tires until they reach the correct pressure level: this value is ind…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos