Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to replace the fuel filter in the Mazda 3?

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Petrol filter
Operation: How to replace the fuel filter in the Mazda 3?

In this tutorial, we can see how to replace the fuel filter in the Mazda 3, a very simple and cost-effective operation. Let's start by lifting the right rear area with a jack, taking all necessary precautions, and then remove the wheel to locate the filter, which is located just behind the suspension arm. Next, we remove the lower protective panel, unscrew the bolts of the mounting bracket with a 10mm wrench, and disconnect the two fuel lines. Once this is done, we connect these lines to the new filter and secure it to the support following the reverse procedure.


Posted on 2 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Mazda 3 2013-2019 - Where is the fuel filter of the Mazda 3 located? Read Answer
    • Mazda 3 2013-2019 - Where is the fuel filter located on the Mazda 3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos