Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Timing Belt

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Timing belt

The timing belt is one of the most important components within the engine of our cars. This guide shows how to replace it once you have acquired a new one. This part should be replaced every approximately 50,000 miles to avoid unpleasant surprises or potential failures at inconvenient times. The timing belt is located on the right side of the engine, so lift the car, remove a wheel, and start disassembling the components you encounter. It is very important to have the right tools and prepare a numbered diagram to help recognise the parts during reassembly.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How and when to replace the timing chain of the Mazda CX-7 2.3
How and when to replace the timing chain of the Mazda CX-7 2.3
Mazda Cx 7 (2006-2012 / MK 1) In this guide, we will see the main instructions that will allow us to disassemble and replace the timing chain of the Mazda CX-7 2.3; the timing cha…
Guide to replacing the timing chain of the Mazda CX-7
Guide to replacing the timing chain of the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the timing chain of the Mazda CX-7. In order to access the timing ch…
How to replace the timing chain in Mazda Cx7
How to replace the timing chain in Mazda Cx7
Mazda Cx 7 (2006-2012 / MK 1) In this video we are going to see how to replace the timing chain in the Mazda Cx7. It should be known that it should be replaced approximately every…

Other guides you may be interested in

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos