Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to remove the rear seat belts in the Mazda 3?

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Checks and maintenance
Operation: How to remove the rear seat belts in the Mazda 3?

In this tutorial, we can see how to remove the rear seat belts in the Mazda 3, which is a simple operation if you have good manual dexterity. First, we open the rear doors, then we grasp the seat cushion, pull it upwards, and separate it from the base. Next, we unscrew the lower bolts of the belts using a 14mm socket wrench, detach the two side panels, remove the transverse plastic cover, and continue by unscrewing the upper fastening bolts with the same wrench. At this point, all that's left is to install the replacement parts by following the reverse procedure.


Posted on 25 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Mazda 3 2019-2026 - What does the wrench light on the Mazda 3 indicate? Read Answer
    • Mazda 3 2013-2019 - How do you reset the service light in Mazda 3? Read Answer
    • Mazda 3 2013-2019 - Where is the coolant temperature sensor on the Mazda 3? Read Answer
    • Mazda 3 2019-2026 - Where is the Mazda 3 fuel filter located? Read Answer
    • Mazda 3 2013-2019 - What warning lights are there in the Mazda 3? Read Answer
    • Mazda 3 2013-2019 - What does the Mazda 3 particulate filter warning light mean? Read Answer
    • Mazda 3 2019-2026 - What warning lights are there in the Mazda 3 dashboard? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos