Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in the Mazda MX-5

Model: Mazda Mx 5 MK 2, NB - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Battery

See other generations:
Video tutorial

Today, we will see the step-by-step instructions that will allow you to remove and replace the battery in the Mazda MX-5, in simple and quick steps. First, open the boot of the vehicle and locate the battery at the back; then disconnect both battery terminals (positive and negative), unscrewing the bracket screw to remove it, as shown in the video.

At this point, install the new battery, of the correct type and with the same amperage; make the electrical connection and start the engine, testing the battery's functionality!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Control Battery on a Mazda MX-5?
How to Replace the Remote Control Battery on a Mazda MX-5?
Mazda Mx 5 (2015-2024 / MK 4, ND) To replace the remote control battery on a Mazda MX-5, lower the lever located at the back of the remote to slide out the key, pulling it from the bo…
Replacing the Remote Battery on Mazda MX-5
Replacing the Remote Battery on Mazda MX-5
Mazda Mx 5 (2005-2015 / MK 3, NC) Replacing the battery in the remote for the Mazda MX-5, like replacing the battery in any car key/remote, is relatively simple. First, rotate the met…
How to Replace the Remote Battery of the Mazda MX-5
How to Replace the Remote Battery of the Mazda MX-5
Mazda Mx 5 (2015-2024 / MK 4, ND) In today's video, learn how to replace the remote battery of a Mazda MX-5. This video is also suitable for other contemporary Mazda models, as they a…

How to Reset the EDC Light on a Mercedes Sprinter?

When the EDC light appears on the instrument cluster of a Mercedes Sprinter, it indicates a generic malfunction in the vehicle's injection system. To identify the source of the problem, a diagnosis must be performed at a workshop. This will help identify the damaged component, which will need to be replaced or repaired. Once the issue has been physically addressed, connect a diagnostic tool to the vehicle's OBD port located under the steering column. This will allow you to clear the errors in the ECU, turning off the EDC light.

Watch the video!


by ScegliAuto

More videos