Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change and Maintenance for the Gearbox

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Transmission fluid

Open and lift the bonnet. The oil reservoir cap for the gearbox is located right next to the battery housing. To check the position, quantity, and quality of the oil, simply pull out the dipstick inserted in the reservoir. This will allow you to check the oil level, and the dipstick will also indicate the temperature range the oil should be in. This type of check should be done with the engine off and at rest to accurately assess the oil quantity when hot. Once done, add more oil if necessary.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Gearbox Oil
Changing the Gearbox Oil
Mazda 3 (2003-2009 / BK, MK 1) If you experience gear engagement issues after many miles, you should change the oil in the gearbox. After loosening some bolts of the sump, allow th…
Resetting the Oil Change Light on a Mazda 3
Resetting the Oil Change Light on a Mazda 3
Mazda 3 (2019-2026 / MK 4, BP) In this brief tutorial, we will show you how to reset the oil change light on a Mazda 3, fourth generation model produced from 2019 onwards. Start th…
How to Reset the Service Light on the Mazda 3 MK2
How to Reset the Service Light on the Mazda 3 MK2
Mazda 3 (2009-2013 / MK 2, BL) In this brief and simple guide, learn the procedure to reset the service light for the routine oil change on the second series Mazda 3. First, get in…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos