Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Air Filter

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Cabin air filter

Open the flap located in front of the front passenger seat to access the glove compartment, which you need to remove by releasing the catches on the side. This allows you to fully lower the glove compartment flap to remove the cover of the filter located at the top right. You can then extract the filter and carefully observe the direction in which it is positioned, as you will need to install the new filter in the same orientation. Simply retrace your steps to reassemble the various components.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda 6 (2002-2008 / GG, MK 1) The cabin air filter is located on the passenger side, behind the glove compartment: open the glove compartment door, disengage the end stop cable, a…
Mazda 6 (2008-2012 / GH, MK 2) The cabin air filter is located on the passenger side, just behind the glove compartment. Open the glove compartment, unclip the side stop bracket by…
Mazda 6 (2008-2012 / GH, MK 2) .. Replacing the cabin air filter on a Mazda 6 model 2 is a simple and quick operation that can be done.. …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos