Mercedes Classe A - Clutch
Clutch Mercedes Classe A (2018-2026 / w 177)
Clutch Mercedes Classe A (2004-2012 / w 169)
Accelerator (1)
Airbag (10)
Alternator (4)
Speaker (4)
Shocks (6)
Antenna (2)
Air conditioning (1)
Car stereo (30)
Roof rack bars (1)
Battery (35)
Ignition coil (1)
Air vents (4)
Control arm (1)
Grille (1)
Transmission (10)
Spark plugs (20)
Glow plugs (5)
Convertible top (1)
Body (11)
Glove compartment (1)
Control unit (1)
Wheel rim (1)
Key (63)
Timing belt (19)
V-belt (6)
Air conditioner (1)
A/C controls (3)
Onboard computer (8)
Checks and maintenance (48)
Dashboard (16)
Shifter boot (1)
CV boot (2)
Bearing (2)
Brake rotors (2)
Rear bench seat (1)
Headlight (13)
Tail light (11)
Air filter (13)
Cabin air filter (27)
Fuel filter (2)
Diesel fuel filter (11)
Oil filter (2)
Clutch (3)
Grille (3)
Fuel injectors (4)
Window switch (1)
Accessory kit (1)
Light bulb (12)
Side marker bulb (1)
Headlight bulb (20)
Tail light bulb (9)
Interior dome light bulb (5)
Antifreeze coolant (1)
Handle (5)
Engine (3)
Power window motor (1)
Starter motor (14)
Transmission fluid (3)
Engine oil (10)
Clock (21)
Door trim panel (24)
Front bumper (8)
Rear bumper (12)
Brake pads (12)
Shift knob (8)
Pump (7)
Fuel pump (5)
Car door (2)
Instrument cluster (20)
Radiator (1)
Heater core (1)
Heater control valve (2)
Fuse box (73)
Seat (7)
Crankshaft position sensor (2)
Engine coolant temperature sensor (2)
Door lock (6)
Suspension system (1)
Side mirror (14)
AdBlue warning light (2)
Warning light – error code (32)
(47)
Tire pressure warning light (32)
Service warning light (143)
Brake drums and shoes (1)
Fuel cap (8)
Windshield wipers (18)
Thermostat (8)
Cylinder head (1)
Tie rods (2)
Center console tunnel (4)
EGR valve (4)
Blower motor (4)
Side window (1)
Steering wheel (6)
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.
Watch the video!
by ScegliAuto
More videos
|