Do it yourself
| ||||
|
Mercedes Classe A - Video tutorial
Model: Mercedes Classe A
W177
- Years 2018-2024 The operation of replacing the flywheel and the clutch unit of the car is a rather complex operation, we consider that we have already removed the engine from the body and brought to the ground with the whole front suspension unit. Then proceed to disassemble the suspension arm, wheel hub holder and shock absorber assembly. Then remove the drive shaft and start chopping all the locking bolts of the clutch unit and flywheel.Once the differential unit has been removed, we will have access to the flywheel and clutch and we can carry out the scheduled maintenance interventions and, if necessary, replace them.
Posted on 11 May 2024 by ScegliAuto
This video is currently unavailable
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |